Nov 23, 2024
HEP 456 Module 5 Section 12 and 13 Planning for Analysis and Interpretation and Gantt chartĀ
HEP 456 Module 5 Section 12 and 13 Planning for Analysis and Interpretation and Gantt chartĀ Name HEP 456: ā¦
((TCO 4) The best route to use in a routing table is also known as the _____.
perfect match
exit route
child route
level 0 route
Correct!
longest match
Which requirement is necessary to have an ultimate route in a routing table?
Classful subnets
Next-hop address
You Answered
Administrative distance
Floating route
All of the above
(TCO 4) Which event will trigger the sending of link-state packets to neighbor routers? The flush timer expires.
Correct!
Initial startup of the routing protocol process on a router.
The synchronization timer expires.
Answers A, B, and C are correct.
None of the above
(TCO 4) An advantage of using static routing is _____.
static routes are not advertised over the network, resulting in better security
they are refreshed regularly so the information is current
they can reroute around downed links
static routing makes it easier to manage the network since routing decision is predictable
None of the above
(TCO 4) What task does a dynamic routing protocol perform?
Discover hosts
Correct!
Update and maintain routing table
Share default gateway information
Network availability
Assign IP addressing
A static route that is configured to connect to a specific remote network is known as a
_____
default static route
standard static route
primary static routing
summary static route
floating static route
(TCO 4) The command someone uses to create a Default Static route on a Cisco router is_____.
ip route 255.255.255.255 255.255.255.255 exit interface
ip route 0.0.0.0 255.255.255.255 exit interface
ip route 0.0.0.0 0.0.0.0 exit interface
You Answered
Answers B and C are correct
None of the above
(TCO 4) Floating Static routes can be created using the ip route command and including a or a(n) _____ at the end of the command.
next-hop ip address
routing protocol
egress interface
administrative distance number
None of the above
(TCO 4) Routers use various types of packets to discover neighboring routers, exchange routing information, and other tasks to learn and maintain accurate information about the network. These packets are known as _____.
data structures
Correct!
routing protocol messages
algorithms
Answers A and C are correct
None of the above
(TCO 4) Dynamic Routing Protocol operations can be described as _____.
routes are entered manually into the routing tables
once a route is in a routing table it never expires
Correct!
the router sends and receives routing messages on its interface
dynamic network layer reachability information
None of the above
TCO 4) RIPv1 has the following characteristic.
Bandwidth is used as the metric for path selection
Updates are event-driven
Uses a Topology Table Database
Uses a Link Table Database
None of the above
(TCO 4) Multiple static IPv6 routes can be summarized into a single static IPv6 route if _____.
the destination networks are contiguous
the contiguous networks can be summarized into a single network address
the multiple static routes all use the same subnet mask
Both answers A and B are correct.
Both answers A and C are correct
Powered by TCPDF (www.tcpdf.org)
